BWGMW - 3812 PRINTER DEVOPER, 1348330

  • MSDS: BWGMW
  • Manufacturer: IBM CORP
  • Product Name: 3812 PRINTER DEVOPER, 1348330
  • National Stock Number: 7025-01-269-3827
Product Identification

Product ID:3812 PRINTER DEVOPER, 1348330
MSDS Date:05/04/1990
FSC:7025
NIIN:01-269-3827
MSDS Number: BWGMW

Responsible Party
IBM CORP
OLD ORCHARD ROAD
ARMONK, NY 10504
US

Emergency Phone: 800-426-4333

Info Phone: 800-426-4333

Cage: 7N876

Contractor
IBM CORPORATION
ARMONK, NY 10504-1709 US

Telephone: 800-426-4333/FAX 214-280-3903

Cage: 30874

Ingredients

STYRENE POLYMER WITH 1,3-BUTADIENE; (BUTADIENE-STYRENE CO

CAS: 9003-55-8

RTECS: WL6478000

OSHA PEL N/K

ACGIH TLV: N/K


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 15%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3


C.I. SOLVENT YELLOW 21; (AZOIC DYE)

CAS: 41741-86-0

OSHA PEL N/K

ACGIH TLV: N/K


FERRITE BEADS (DEFINED BY 29 CFR 1910.1200 AS ARTICLES.

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHALATION:NON-TOXIC.
INGESTION:NON-TOXIC. SKIN:NON-IRRITATING. EYES:MAY ACT AS
MECHANICAL IRRITANT. CHRONIC:RARE INDIVIDUALS MAY NOTE SKIN RASH
WITH REPEATED CONTACT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE AT INTENDED USE
CONCENTRATIONS.

First Aid

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE INDIVIDUAL TO FRESH
AIR. SKIN:WASH WITH SOAP AND WATER. EYES:FLUSH COPIOUSLY WITH
RUNNING WATER FOR AT LEAST 15 MINUTES.

Fire Fighting

Extinguishing Media:WATER, DRY CHEMICAL, CARBON DIOXIDE, FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .FIRE MAY PRODUCE HAZ DECOMP PROD SUCH AS CARBON DIOXIDE,
CARBON MONOXIDE.
Unusual Fire/Explosion Hazard:LIKE MANY FINELY DIVIDED MATLS, TONER
DUST, IN HIGH CONC CAN FORM EXPLO MIX IN AIR WHICH, IF IGNITED,
COULD RESULT IN DUST EXPLOSION.

Accidental Release

Spill Release Procedures:CONTAIN FOR TREATMENT/DISPOSAL, CAUTION -
MINIMIZE GENERATION OF DUST DURING CLEANUP. USE OF VACUUM CLEANER
IS PREFERABLE. EXERCISE CARE TO NOT SLIP ON SMALL BEADS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID EXCESSIVE HEAT DURING STORAGE.
KEEP OUT OF REACH OF CHILDREN.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:NONE.
Protective Gloves:NONE.
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:239F,115C
Spec Gravity:1.1 (H*20=1)
Solubility in Water:0%
Appearance and Odor:BLACK POWDERY MATERIAL, SLIGHT ODOR
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
NITROGEN OXIDES, UNIDENTIFIED ORGANICS.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.